Towing is a highly responsible operation that involves moving vehicles by ensuring the safety of property, people, and traffic infrastructure. Legal towing compliance is not only about avoiding fines but also about maintaining high safety standards that prevent mechanical failures and accidents.
In this article, Brisbane Towing – a leading provider of towing services in Brisbane – will cover a towing safety inspection checklist to ensure you meet all legal requirements. Let’s start!
Towing Vehicle Safety Inspection Checklist
A pre-tow inspection is the first step before every towing operation. The towing vehicle safety inspection checklist below will help you avoid penalties and accidents while towing a vehicle:
Verify towing capacity: Always check that the Gross Vehicle Weight Rating and Gross Combination Weight Rating of the towing vehicle can support the trailer. Ensure the tongue weight is within 10 to 15% of the trailer’s total weight.
Inspect tow hitch & coupling: Confirm the hitch type matches the trailer setup. Check for cracks, wear, or rust on the hitch and coupler. Ensure the hitch pin and locking mechanism are secure.
Safety chains: Make sure safety chains are crossed under the tongue and securely fastened. Inspect for signs of damage, corrosion, or excessive slack.
Breakaway system: It is recommended to verify that the breakaway cable is attached and functional for trailers weighing over 1,500 kg. Test the emergency braking system to verify it will activate if the trailer detaches.
Lighting check: Test brake lights, tail lights, turn signals, and hazard lights on the trailer. Also, inspect trailer reflectors for dirt, cracks, or missing parts.
Wiring harness: Inspect the trailer plug and wiring harness for wear, corrosion, or exposed wires. Always ensure a secure and clean electrical connection between the trailer and the towing vehicle.
Brake controller: Verify the in-cab trailer brake controller is set appropriately for the load weight. You can also perform a manual test to ensure that trailer brakes engage smoothly.
Vehicle tyre pressure: Use a tyre pressure gauge to ensure all vehicle and trailer tyres are inflated to the manufacturer’s recommended PSI. It will help you control your vehicle more easily.
Tyre tread depth: Inspect your tyres for uneven wear, cracks, bulges, or exposed steel belts. It is best to replace your tyres with tread depth below the legal limits.
Wheel bearings: Listen for grinding noises or wheel play that may indicate worn bearings. Ensure all vehicle and trailer wheel bearings are well-greased and sealed for a safe trip.
Read our other blogs as well:
Emergency towing in Brisbane: 10 things to keep in mind
Shipping a tractor in Australia: How-to guide, cost, and more
Oversized load towing essentials and expert tips to do it right
Types of tow trucks: Everything you need to know
10 car towing tips to avoid accidents in 2025
Load securement: Ensure all cargo is properly tied down with straps, locks, or chains. You can also use edge protectors to avoid cutting through straps.
Weight compliance: Carry weightbridge receipts or use onboard weighing systems for proof of compliance if required. Ensure total weights are within legal axle and gross limits.
Extended side mirrors: Install towing mirrors if the trailer is wider than your towing vehicle. Always ensure that all mirrors are clear and adjusted for full rearward visibility.
Rearview cameras: Get rearview cameras installed for a better driving experience. Test the rear camera system for functionality during larger or enclosed trailers.
Reflective triangles and flares: Keep at least three reflective triangles in the towing vehicle in case of breakdowns.
Fire extinguisher: Always carry a charged fire extinguisher for commercial towing or transporting hazardous goods.
Wheel chocks: Use wheel chocks when loading and unloading vehicles onto tow beds or trailers.
Registration and insurance: Ensure that both the towing vehicle and trailer have valid registration and insurance.
Now, you have an idea of a towing vehicle safety checklist. So, let’s have a quick look at the legal penalties for non-compliance.
Legal Penalties for Non-Compliance
Random roadside inspections by authorities can ground vehicles that fail safety checks. Failure to meet the towing safety standards can result in:
- Fines and citations
- Impoundment of trailer and vehicle
- License suspension
- Increased insurance premiums
- Civil liability in case of an accident
Towing Vehicle Safety Checklist: Wrapup
We hope that the above article helped you get familiar with the safety inspection checklist for towing vehicles. A well-structured towing vehicle safety inspection will help you ensure the well-being of drivers and the public on the road.
If you ever find yourself in need of towing services, call us on 0438 155 555 for quick and affordable towing in Brisbane. We will truly care about your vehicle and safety.
Also, check out our most popular services:
Accident towing services in Brisbane
Container towing services in Brisbane